How do you reset a Baldwin lock?

If you wish to reset your Baldwin® Evolved, press and hold down the reset button for 10 seconds until the lock beeps and the lock face LEDs flash red. Refer to Owner’s Manual.Click to see full answer. Likewise, people ask, how do you change a Baldwin lock? How to Remove a Baldwin Lock Release the armor of the lock by unscrewing any screws holding it in place. Expose the cylinder set by lifting the released armor front away from the door. Loosen the screws in the now exposed cylinder set and remove it from the door using a screwdriver. Unthread the screw cover on the inside of the door. Likewise, can Baldwin locks be keyed to Schlage? Baldwin locks use a Schlage key cylinder inside the lock to operate the tumblers and open and lock the mechanism. A Schlage re-keying kit will re-key a Baldwin lockset in minutes to secure a home or office after a change of residency or employees. Keeping this in consideration, how do you open a Baldwin lock? Put the key into the cylinder, with the cuts on the keys facing up, and turn the key one quarter turn towards the lock side of the door. This retracts the latch and opens the door. REMEMBER- You must push the bottom button on the edge of the door if you wish to leave the thumb piece unlocked.How do I change a door lock cylinder? Steps Remove the flat screw under the latch. Turn the key a quarter of the way. Pull on the key while pushing on the other side of the lock. Turn the key and slide the new cylinder into the hole. Screw the flat screw back in. Test your key to make sure that it unlocks your door.